Aftermarket Assassins Canam X3 clutch kit, magnetic adjustable clutch weights primary spring

Aftermarket Assassins CAN AM X3 S2 CLUTCH KIT

$295.00
by Aftermarket Assassins
Type: PERFORMANCE
Select Model/ Year
  • Kit will work on any 2017-2022 Can Am Maverick X3 Turbo: 120hp, 154hp, or 172hp Base Models: 2 & 4 Seat
  • Does not work with RR models or P-Drive clutches (We have a specific kit for those models)
  • The S2 X3 clutch kits pack a huge punch!  No matter the terrain, they hit hard and just keep pulling for days.  On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner.  In the dunes you'll see the same benefits, but also have much less bogging when climbing that big dune.  The machine will hold RPM so you can get where you need to go, and get there faster!  Going mudding?  Our mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. Are you a rock crawler?  Our smooth engagement and precise feel down low will give you the confidence to tackle any obstacle.  We have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world.  We know you'll be extremely pleased with the performance gain from our clutch kits!  
  • Kit will work on any 2017-2019 Can Am Maverick X3 Turbo: 120hp, 144hp, or 172hp Base Models: 2 & 4 Seat
  •  Big performance gains as these 3 cylinder motors love to rev!  The factory clutches these heavy, making them ramp up RPM slowly.  Once you ride a properly clutched X3 that ramps up RPM quickly, you'll see the major difference. 
  • S2 kits include our AA Recoil magnetic adjustable clutch weights, our primary spring & setup guideline.  
  • Our setup guideline will let you know how to set your weights for stock horsepower to 200rwhp, 28" - 32" tires, 28-32" paddle tires, different altitudes & more.
  • Fully adjustable magnetic weights are easy to use, and with our special tool are also easy to adjust
  • Adjustable from 50 to 64 grams.  Weights have more tip weight and act heavier.  This means they also accelerate and up shift much harder.
  • A must have when changing tires, tuning your machine, or running paddles
  • Cooler running belt temps from a more efficient power transfer which results in longer belt and clutch life.  With this kit and our Gboost Belts we have ran thousands of hard miles in the dunes & trails at higher horsepower with ZERO belt failures.  
  • Big acceleration gains an better power transfer to the rear wheels.
  • Close to stock engagement which is very smooth (Higher engagement springs available if needed)
  • Select your exact year/model which lets us know what weights to send you as the clutch casting is different between some years and models.  2017 X3's and 2018 120HP Base X3's (Kit 108-1008-A) use the same casting, while 2018+ 172HP Base X3's along with 2019+ 120HP (Kit 108-1008-B) use the new style clutch casting.  This is a very minor change, but our weights needed slight modification to work.  If you upgraded your older style casting to a new one, please let us know in the order notes.
  • Our Recoil clutch weights are easily adjustable with simple magnets.  They have a custom AA profile, the BEST coating on the market(nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modification in the future, without the need to buy extra parts.  The magnetic weights are the best option to properly place the mass where we need it on the weight for best performance for your application.
  • Our special clutch tool, clutch compression tool and clutch puller are needed to install this clutch kit. 
  • We found the stock secondary clutch to work very well.  Once we have helixes available, you'll see our S3 clutch kits come out with the helix/spring.
  • Target peak RPM for stock or any other tune with the rev limit set between 8300-8700 RPM is 7700-7900 RPM.  For AA tunes and other tunes with an 8800-9000 RPM rev limit, target should be 7900-8300.  Testing should be done on a somewhat level ground from a 10-20mph roll on to full WOT and RPM checked as passing by 55-60MPH.

Testimonials

Fast and easy checkout with quick email response times.

Kevin M.

Was looking for something specific- gave them a call and was able to order it up, even though it was not on the website.

Ricardo D.

My new go to shop for all things offroad.

Dustin S.

Boyfriend and I both have a set of the 2.5’ whips for our jeeps and use them every chance we get. They look for show and work even better for light in camp and on the trails. They bolt up similar to a radio antenna and have a quick release feature that we have never seen before but absolutely love. Definitely top 5 favorite accessories we’ve bought for our jeeps, and customer service is just as great as their products!

Alexandra R.